$7.90
This swivel ball joint is manufactured by Raymond for its electric lift trucks and is documented for use on Raymond 8300, 8400, and 8500 series trucks. It provides the articulating pivot connection within the linkage it serves, allowing controlled angular movement between two linked components while holding them positively coupled.
Raymond builds this swivel ball joint for its electric lift trucks, documented for use on the Raymond 8300, 8400, and 8500 series. It forms the articulating pivot within the linkage it serves, letting two linked components move through a controlled range of angle while staying positively coupled, so motion transfers through the joint without slop.
A ball joint carries load through a ball riding in a socket, and that bearing surface is where it wears. As the ball and socket lose their fit the joint develops play, which turns into loose, imprecise linkage movement, knocking, and eventually a connection that can separate, all reasons to replace it once free play shows up. Fitting a fresh joint restores tight, controlled articulation to the linkage.
Match the replacement to the original by its stud size, its housing diameter, and its thread, since those three dimensions determine whether the joint seats in the linkage and threads into its mounting the same way the original did.
| Type | Ball joint |
|---|---|
| Equipment | Raymond lift trucks |
| Manufacturer Part Number | RA860-730-007 |
| Weight (lbs) | 0.20 |
| Length (in) | 1.15 |
| Width (in) | 1.05 |
| Height (in) | 1.5 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA860-730/007 |
|---|---|
| Product ID | 12204 |
| Short Link | https://forkliftsetc.net/?p=12204 |
| OEM Number | RA860-730-007 |
| Part Number |
|---|
| 800050310 |
| RA860-730-007 |
| RA860-730/007 |
| TY00590-00241-71 |
