$4.64
A cable clamp secures wiring and cable runs, holding a harness or cable in place along its routing path so it cannot chafe, sag, or work loose under vibration. This Raymond cable clamp serves that role on Raymond lift equipment and weighs about 0.15 pounds, supplied as a direct replacement for the clamp at the routing point the original assembly used.
Securing wiring and cable runs against the frame, this Raymond cable clamp holds a harness or cable in a fixed position so it cannot chafe, snag, or vibrate loose during daily lift truck operation. Routed wiring left unsupported rubs against edges and moving parts until the insulation wears through, so the clamp is what keeps a cable run intact over time.
Raymond catalogs it as a service replacement for a specific routing point on its lift equipment, sized to the cable and mounting it was built for. At about 0.15 pounds it is a small part whose job is preventing a much larger electrical fault.
Because clamps are built to hold a specific cable diameter, match the clamp size and mounting to the one being replaced, since a clamp sized to the wrong diameter will not close securely on the cable it retains.
| Type | Cable clamp |
|---|---|
| Equipment | Raymond |
| Manufacturer Part Number | RA811-925-005 |
| Weight (lbs) | 0.15 |
| Length (in) | 0.70 |
| Width (in) | 0.65 |
| Height (in) | 0.8 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA811-925/005 |
|---|---|
| Product ID | 11111 |
| Short Link | https://forkliftsetc.net/?p=11111 |
| OEM Number | RA811-925-005 |
| Part Number |
|---|
| 800041386 |
| RA811-925-005 |
| RA811-925/005 |
| SY413316[SMH] |
| TY00590-03138-71 |
| TY005900313871 |
| SY413316 |
