$4.50
This Raymond cover plate closes off an access opening or housing face on the lift truck, sealing the enclosed area against dust, debris, and moisture while allowing service access when removed. It mounts over the opening it was cataloged for and replaces a plate lost, warped, corroded, or damaged so it no longer seals flat.
A cover plate closes off an access opening or housing face on a Raymond lift truck, sealing the enclosed area against dust, debris, and moisture while still allowing service access when it is unbolted and removed. This Raymond plate mounts over the specific opening it was cataloged for, seating flat against the mating face so the port stays covered and protected in service.
Because it is a bolt-on closure rather than a load-bearing structural member, a cover plate is usually replaced after physical damage, after corrosion that has eaten through or distorted the metal, or after the loss of an original, and sometimes after a plate has warped and no longer seats flat enough to seal. A plate that does not lie flat lets contamination reach whatever it was meant to protect.
Match the bolt pattern and the opening size to the plate being replaced, since the plate has to cover the port fully and its holes must align with the tapped or clearance holes to seat flush.
| Type | Plate, Cover |
|---|---|
| Weight (lbs) | 4.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1304952 |
|---|---|
| Product ID | 12107 |
| Short Link | https://forkliftsetc.net/?p=12107 |
| Part Number |
|---|
| RA1304952 |
