$8.65
The Raymond magnetic drain plug threads into the drain port of a drivetrain or hydraulic housing and captures ferrous debris on its magnetic tip, pulling metal shavings and wear particles out of circulation before they reach gears, bearings, or the hydraulic system. It seals the drain opening and serves as a diagnostic point on Raymond electric lift trucks, since the material on the magnet signals internal wear.
Threads into the drain port of a Raymond drivetrain or hydraulic housing and captures ferrous debris on its magnetic tip, pulling metal shavings and wear particles out of circulation so they do not recirculate through gears, bearings, or the hydraulic system. As a magnetic drain plug, it doubles as the sealing plug for the drain opening and as a diagnostic point, since the amount of material clinging to the magnet at each oil change signals internal wear. This is a Raymond part used on Raymond electric lift trucks. During service, clean the accumulated debris from the magnet before reinstalling and renew the sealing washer if one is used. Match the plug to the thread size and seat of the drain port on the specific Raymond housing.
| Type | Magnetic plug |
|---|---|
| Equipment | Raymond |
| Manufacturer Part Number | RA782-426 |
| Weight (lbs) | 0.20 |
| Length (in) | 1.00 |
| Width (in) | 1.00 |
| Height (in) | 0.8 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA782-426 |
|---|---|
| Product ID | 12295 |
| Short Link | https://forkliftsetc.net/?p=12295 |
| OEM Number | RA782-426 |
| Part Number |
|---|
| 800140815 |
| BT782-426 |
| PM782-426 |
| RA782-426 |
| SY96239 |
