$0.98
This Raymond retaining ring seats into a groove on a shaft or inside a bore to hold a bearing, gear, or other component against axial movement, doing the work of a machined shoulder without cutting one into the part. It springs into its groove and holds under normal operating thrust, then comes out with the right pliers when the assembly is opened.
This Raymond retaining ring seats into a groove on a shaft or inside a bore to hold a bearing, gear, or other component against axial movement, doing the job of a machined shoulder without cutting one into the part. It springs into its groove and holds position under the normal thrust of operation, then comes out with the right pliers when the assembly needs to be opened.
A retaining ring is a service item by nature: once it loses tension or deforms during removal, it should be replaced rather than reused, since a ring that no longer holds its groove lets the retained part walk out of position. Match the ring to the groove diameter and width it seats in, since that fit is what sets its grip.
| Type | Ring, Retaining |
|---|---|
| Weight (lbs) | 0.25 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1123293/001 |
|---|---|
| Product ID | 11804 |
| Short Link | https://forkliftsetc.net/?p=11804 |
| Part Number |
|---|
| RA1123293-001 |
| RA1123293/001 |
