$10.21
A retaining ring seats in a groove on a shaft or in a bore to hold a bearing, gear, or other component axially in place, taking the thrust that keeps the part from sliding out of position. Raymond's retaining ring is a small but load-bearing item, and a ring that is sprung, worn, or the wrong size lets the part it secures work loose.
Seated in a machined groove on a shaft or inside a bore, a retaining ring holds a bearing, gear, or similar component in its axial position and absorbs the thrust that would otherwise let the part creep out of place. This Raymond retaining ring is small but load-bearing: the groove locates it, and the ring's spring tension is what actually keeps the assembly captive under running loads.
A ring that has been sprung during a past removal, worn thin, or fitted in the wrong size loses that grip, and the component it secures begins to work loose, introducing end play into the assembly. Installing a correct ring restores positive retention.
Match the ring to the shaft or bore diameter and to the width and depth of the groove it seats in. A ring off in size or thickness will not sit square in the groove and cannot hold the thrust the position demands.
| Type | Ring, Retaining |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.25 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA223-001-569/C68 |
|---|---|
| Product ID | 11280 |
| Short Link | https://forkliftsetc.net/?p=11280 |
| Part Number |
|---|
| RA223-001-569/C68 |
