$22.35
Seating into a machined groove to hold a bearing, shaft, or shaft-mounted part in position on Raymond equipment is this retaining ring's job, keeping the part from sliding out of place. Raymond lists it for that assembly, taking the axial load that locks the components together as the truck works.
Seating into a machined groove, this Raymond retaining ring holds a bearing, shaft, or shaft-mounted part in position and keeps it from sliding out along its axis. It works by springing into the groove and standing proud of it to form a shoulder that the retained part bears against, which fixes the part's endwise position without any threaded fastener.
Raymond lists this ring for the assembly it belongs to. A retaining ring is replaced when it has lost tension, spread, or been deformed on removal, since a ring that no longer holds its groove lets the part it retains work loose.
Match the ring to the groove diameter and to whether it seats on a shaft or inside a bore, since external and internal rings of the same nominal size are not interchangeable and the groove diameter sets which ring holds.
| Type | Retaining ring |
|---|---|
| Equipment | Raymond |
| Manufacturer Part Number | RA780-004-100 |
| Weight (lbs) | 0.20 |
| Length (in) | 1.15 |
| Width (in) | 0.05 |
| Height (in) | 0.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA780-004-100 |
|---|---|
| Product ID | 12430 |
| Short Link | https://forkliftsetc.net/?p=12430 |
| OEM Number | RA780-004-100 |
| Part Number |
|---|
| 800041269 |
| BT313666-158 |
| BT780004100RA |
| PM313666-158 |
| PM780-004-100 |
| RA313666-158 |
| RA780-004-100 |
| RA780-005-100 |
| RA780004100 |
| RADS232953 |
| TY00591-63148-81 |
| YT220002039 |
