$16.01
This Raymond sleeve pin carries a load or forms a pivot at a linkage or mounting on Raymond lift trucks, running inside a sleeve that guides it. The pin transmits load between the parts it joins while the sleeve gives it a controlled bearing surface. It wears where it pivots or slides, developing play that shows up as slop in the joint, and replacing it restores a tight fit.
A Raymond sleeve pin carries load or forms a pivot at a linkage or mounting on Raymond lift trucks, running inside a sleeve or bore that guides it and gives it a controlled bearing surface. The pin transmits load between the parts it joins while the sleeve keeps that motion on a defined diameter rather than in a worn bore.
A sleeve pin wears where it pivots or slides, and as it does the joint develops play that reads as slop or knock in the linkage. Replacing the pin returns a tight, correctly located fit. Inspect the mating sleeve or bore at the same time, since a worn bore will quickly wear a fresh pin.
| Type | Sleeve pin |
|---|---|
| Equipment | Raymond lift trucks |
| Manufacturer Part Number | RA850-139-079 |
| Weight (lbs) | 0.45 |
| Length (in) | 1.00 |
| Width (in) | 0.55 |
| Height (in) | 1.5 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | E-8831 |
|---|---|
| Product ID | 13977 |
| Short Link | https://forkliftsetc.net/?p=13977 |
| OEM Number | RA850-139-079 |
| Part Number |
|---|
| 800135659 |
| E-8831 |
| LP757-4241 |
| RA850-139-079 |
| RA850-139-277 |
| RA850139079 |
