$4.95
Set between two parts, this Raymond spacer holds them a fixed distance apart so the assembly torques down without binding. Raymond supplies it for its lift trucks, and its length sets that gap, positioning the surrounding hardware square so the stack seats and preloads the way it should through service and use on the truck.
Set between two parts, a spacer holds them a fixed distance apart so the assembly torques down without binding. Raymond supplies this one for its lift trucks, and its length sets that gap. When ordering a replacement, match the inner diameter, outer diameter, and length to the spacer you remove, since the length controls the spacing it holds.
| Type | Spacer |
|---|---|
| Equipment | Raymond |
| Manufacturer Part Number | RA828-000-260-001 |
| Weight (lbs) | 0.15 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA828-000-260/001 |
|---|---|
| Product ID | 12461 |
| Short Link | https://forkliftsetc.net/?p=12461 |
| OEM Number | RA828-000-260-001 |
| Part Number |
|---|
| 220021074 |
| 3125583 |
| 800062089 |
| E-7013 |
| HY3125583 |
| LP762-1047 |
| RA3125583 |
| RA828-000-260-001 |
| RA828-000-260/001 |
| RA828000260001 |
| SY108296 |
| YT220021074 |
