$1.01
Snapping into a groove to keep a shaft or bearing from sliding out of position on Crown lift trucks is this retaining ring's purpose, carrying the axial load that locks an assembly in place. Crown lists it for service, seating in the machined groove so the components stay set and cannot work loose under use.
Snapping into a machined groove, this Crown retaining ring forms a shoulder that keeps a shaft or bearing from sliding out of position, carrying the axial load that locks the assembly in place. It holds the retained part captive against the thrust that would otherwise let it walk along the shaft or out of its bore.
Crown lists this retaining ring for service, and because a ring that has been sprung out and refitted loses its holding tension, it is replaced whenever it is removed. Match the ring to the groove diameter and to the shaft or bore it seats in, since ring size governs whether it seats fully and holds.
| Type | Retaining Ring |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.01 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR60009-065 |
|---|---|
| Product ID | 15537 |
| Short Link | https://forkliftsetc.net/?p=15537 |
| Part Number |
|---|
| CR60009-065 |
