$2.73
Locking a bearing, shaft, or component against axial movement, this retaining ring springs into its groove and holds the retained part in position under the loads and vibration of lift truck operation. It resists the force that would otherwise let the part shift or work loose, seating securely as a direct replacement in the assembly it secures.
Springing into a machined groove, this retaining ring holds a bearing, shaft, or component against the axial movement that the loads and vibration of lift truck operation would otherwise drive. It resists the thrust that would let the retained part slide, contact adjacent parts, or work its way loose.
It is a small component with a definite job, and it is replaced whenever the assembly it secures is opened up, since a ring that has been sprung open or nicked during removal no longer holds its rated load. A fresh ring restores secure, positive retention.
Match the ring to the groove diameter and thickness on the assembly it secures, since a retaining ring sized to the wrong groove will not seat square or hold its load.
| Type | Retaining Ring |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HW-270-1 |
|---|---|
| Product ID | 15086 |
| Short Link | https://forkliftsetc.net/?p=15086 |
| Part Number |
|---|
| HW-270-1 |
