$1,321.36
The Raymond outer scissor arm is a structural link in the scissor mechanism, one of the crossing arms that pivot against each other to raise and lower the load as the mechanism extends and retracts. It carries the lift load through its pivot points, so its length and pivot spacing are specific to the assembly and not interchangeable with the other arms in the set.
One of the crossing arms in a scissor mechanism, this Raymond outer scissor arm is the structural link that pivots against its mating arm to raise and lower the load as the mechanism extends and retracts. It carries the mechanical load of the lift through its pivot points, so its length and the spacing of those pivots are specific to the assembly it belongs to, and the geometry of the whole scissor stack depends on each arm being the right one in the right place.
A bent, worn, or elongated arm throws off that geometry, which shows up as uneven lift, binding, or added play in the mechanism. As the outer member it locates on the outside of the crossing pair and is not interchangeable with the inner arm or with arms from a different position in the stack.
Match the arm position, length, and pivot spacing to the member being replaced, since the arms in a scissor set are staged and do not substitute for one another.
| Type | Scissor Arm Outer #3 |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1020235 |
|---|---|
| Product ID | 13937 |
| Short Link | https://forkliftsetc.net/?p=13937 |
| Part Number |
|---|
| RA1020235 |
