$5.42
This Raymond shim is a thin machined shim used to set the correct clearance or alignment at an assembly on Raymond lift trucks, added or swapped in the right thickness to control a gap or preload so bearings and mating parts sit at their designed positions. It is replaced when deformed or when clearance needs resetting during a rebuild.
Machined to a set thickness, a shim like this one establishes the correct clearance or alignment at an assembly, closing a gap or setting a bearing preload so mating parts sit at their designed positions. It is added or swapped in the right thickness to bring a joint into specification during assembly or a rebuild.
A shim is replaced when it is deformed, or when clearance needs resetting after other parts in the stack wear. Match the shim thickness to the clearance being set, since thickness is exactly what determines the correction it makes.
| Type | Shim |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA828-006-868-003 |
|---|---|
| Product ID | 13961 |
| Short Link | https://forkliftsetc.net/?p=13961 |
| Part Number |
|---|
| RA828-006-868-003 |
