$47.56
Cylindrical and close-fitted, this Raymond sleeve slips over a shaft or into a bore to protect the surface, take up wear, or set spacing between components. It gives a renewable wear surface, so a shaft or housing does not have to be replaced when the running fit wears loose; the sleeve absorbs the wear and is swapped instead.
Cylindrical and close-fitted, this Raymond sleeve slips over a shaft or into a bore to protect the surface, take up wear, or set spacing between components. A sleeve gives a renewable wear surface, so a shaft or housing does not have to be replaced when the running fit wears loose; the sleeve absorbs the wear and is swapped instead.
Once a sleeve is scored, out of round, or worn past its fit, it no longer holds the intended clearance and the assembly develops play. This Raymond replacement restores the original fit. Match the inside diameter, outside diameter, and length to the sleeve being replaced, since those dimensions set the fit on both the shaft and its bore.
| Type | Sleeve |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1030800-001 |
|---|---|
| Product ID | 14386 |
| Short Link | https://forkliftsetc.net/?p=14386 |
| Part Number |
|---|
| RA1030800-001 |
