$9.62
Fitting over a shaft or inside a bore, this Raymond sleeve sets spacing, protects a surface, or provides a renewable wear surface at its point in a lift truck assembly. Depending on where it sits, it acts as a spacer that positions a component along a shaft, a wear surface that takes friction so the shaft does not, or a liner that adapts one diameter to another.
Fitting over a shaft or inside a bore, this Raymond sleeve sets spacing, protects a surface, or provides a renewable wear surface at its point in a lift truck assembly. Depending on where it sits, a sleeve can act as a spacer that positions a component along a shaft, a wear surface that takes friction so the shaft does not, or a liner that adapts one diameter to another.
As a simple machined part it has no moving elements; its whole job is dimensional, holding a fit or a spacing that the surrounding parts depend on. Confirm the inner and outer diameter and the length against the sleeve being removed, since a sleeve is made to one fit and will not seat or space correctly if any of those dimensions differ.
| Type | Sleeve |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA828-000-987 |
|---|---|
| Product ID | 15356 |
| Short Link | https://forkliftsetc.net/?p=15356 |
| Part Number |
|---|
| 800140095 |
| E-7005 |
| LP761-1449 |
| RA828-000-987 |
| RADS232498 |
| SY96237 |
| SY99-02150 |
