$23.91
A spacer keeps two parts a fixed distance apart so a bolted stack torques down square, and Crown uses this one on its lift trucks to hold that gap. Its length sets the standoff, positioning the surrounding hardware so the stack seats and loads the way it should through service and use on the Crown truck.
A spacer keeps two parts a fixed distance apart so a bolted stack torques down square. Crown uses this one on its lift trucks to hold that gap, and its length sets the standoff. Match the inner diameter, outer diameter, and length to the spacer you remove, since the length controls the clearance it maintains.
| Type | Spacer |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.05 |
| Length (in) | 0.05 |
| Width (in) | 0.04 |
| Height (in) | 0.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR94973 |
|---|---|
| Product ID | 15491 |
| Short Link | https://forkliftsetc.net/?p=15491 |
| Part Number |
|---|
| CR094973 |
| CR94973 |
| TSA-CR094973 |
| TSA-CR94973 |
