$5.95
Positioning a bearing at the correct height in its bore is the job of this lower bearing spacer, which Raymond fits to its lift trucks. It holds the bearing at its set clearance so the shaft turns true, its length setting the bearing's position so the rotating stack seats square and runs the way it should in service.
Positioning a bearing at the correct height in its bore is the job of a lower bearing spacer. Raymond fits this one to its lift trucks, where it holds the bearing at its set clearance so the shaft turns true. Match the inner diameter, outer diameter, and length to the spacer you remove, since the length sets the bearing's position.
| Type | Spacer, Lower Bearing |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.15 |
| Length (in) | 1.20 |
| Width (in) | 1.25 |
| Height (in) | 0.7 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1004672 |
|---|---|
| Product ID | 11333 |
| Short Link | https://forkliftsetc.net/?p=11333 |
| Part Number |
|---|
| RA1004672 |
| SY1237233 |
