$319.90
Steer hub for Crown lift trucks, machined to a 6.5 inch size. It mounts at the steered wheel and carries the wheel and its bearings, letting the wheel rotate freely and turn as the truck is steered. Crown catalogs this hub under its wheels and tires hardware, and it fits the RC 5500 series stand-up counterbalanced lift truck.
Machined to a 6.5 inch size, this Crown steer hub mounts at the steered wheel and carries the wheel together with its bearings, letting the wheel rotate freely and pivot as the truck is steered. Crown catalogs it under its wheels and tires hardware and uses it on the RC 5500 series stand-up counterbalanced lift truck.
The hub arrives machined and ready to accept the wheel bearings and mounting hardware, taking the place of a hub that has worn at its bearing bores or been damaged. Because it locates the steered wheel, a worn or out-of-round hub shows up as play, wander, or uneven tire wear at the steer position.
Match the 6.5 inch hub size and the bolt pattern to the steer wheel on the truck, since both must line up for the wheel and bearings to seat correctly.
| Type | Steer Hub |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 22.00 |
| Length (in) | 10.05 |
| Width (in) | 5.05 |
| Height (in) | 6.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR134825 |
|---|---|
| Product ID | 14244 |
| Short Link | https://forkliftsetc.net/?p=14244 |
| Part Number |
|---|
| CR134825 |
| SY84034 |
| SY92371 |
| TSA-CR134825 |
| TSA-SY84034 |
| TSA-SY92371 |
