$65.62
A threaded rod is a rod threaded along its length that ties components together or provides an anchoring point in an assembly. Hyster lift trucks use this threaded rod, a chassis hardware component measuring 9.3 inches long and weighing 1.9 pounds. It serves as a direct replacement for the original rod at the chassis hardware point it came from on the truck.
A threaded rod carries a thread along its length so it can be locked with nuts at each end, forming an adjustable tension or spacing member in an assembly. This Hyster threaded rod serves a chassis hardware position on Hyster lift trucks, where it ties components together or holds a fixed spacing that nuts set in place. It weighs about 1.9 pounds.
Threaded rods loosen, corrode, or gall at the threads over time, and a rod whose threads are damaged will not hold a nut at the correct tension, so it is replaced to restore a secure, adjustable joint.
Because a threaded rod is cut to a specific length and thread, match the overall length and thread pitch to the rod being replaced, since a mismatch in either will not set the assembly to its intended dimension.
| Type | Threaded Rod |
|---|---|
| Equipment | Hyster lift trucks |
| Weight (lbs) | 1.90 |
| Length (in) | 1.00 |
| Width (in) | 1.05 |
| Height (in) | 9.3 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HY4609863 |
|---|---|
| Product ID | 14015 |
| Short Link | https://forkliftsetc.net/?p=14015 |
| Part Number |
|---|
| 800172328 |
| HY4608858 |
| HY4609863 |
| YT4609863 |
