$18.60
Seating in a groove to hold a shaft-mounted part in position on Toyota lift trucks is this ring's job, keeping the assembly from shifting under use. Toyota carries it as a service replacement, locking into the groove so the part stays set against axial movement as the truck works through its load cycles.
A retaining ring seats in a groove to hold a shaft-mounted part in position, and this Toyota ring keeps its assembly from shifting along the shaft under use. Springing into its groove, it forms a shoulder that locates the retained component and holds it against the load and vibration of normal operation.
Toyota carries this ring as a service replacement for its lift trucks, and it is replaced whenever it is removed during service or has lost the spring tension that keeps it seated. A ring that no longer grips can work out of its groove and let the part it retains move.
Match the ring to the groove diameter and to the shaft or bore it seats in, since those dimensions decide whether it seats fully and holds.
| Type | Ring |
|---|---|
| Equipment | Toyota lift trucks |
| Manufacturer Part Number | RA116-000-331 |
| Weight (lbs) | 0.05 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | E-3652 |
|---|---|
| Product ID | 14542 |
| Short Link | https://forkliftsetc.net/?p=14542 |
| OEM Number | RA116-000-331 |
| Part Number |
|---|
| 005913767881 |
| 220021117 |
| 3125804 |
| 800062141 |
| CL7002217 |
| E-3652 |
| ET011361 |
| LP1302-7039 |
| RA116-000-331 |
| TY00591-37678-81 |
| YT220021117 |
