$81.78
This tube is used on Crown lift trucks as a rigid line or structural passage that routes fluid, air, or wiring, or acts as a spacer or sleeve within an assembly. Crown specifies tubing by diameter, wall thickness, length, and end fittings so a replacement seats and connects the same way as the original, keeping the routing or spacing function intact within the assembly.
Crown specifies this tube by diameter, wall thickness, length, and end fittings so it works as a rigid line or structural passage, routing fluid, air, or wiring, or serving as a spacer or sleeve within the assembly it fits. The rigid wall holds the tube's shape and routing under the pressure or load its position sees.
A tube in service can crack, corrode, dent, or lose its seal at the end fittings, which shows up as leaks, restricted flow, or lost support, the point at which a fresh tube restores a clean, sealed run.
Match the outside diameter, wall thickness, length, bend or shape, and any flares or fittings at the ends against the tube coming off, since those decide whether it seats and connects the same way.
| Type | Tube |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.70 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR147577 |
|---|---|
| Product ID | 14434 |
| Short Link | https://forkliftsetc.net/?p=14434 |
| Part Number |
|---|
| CR147577 |
