$4.39
A washer spreads a fastener's clamp load across a broader surface and helps a bolted joint hold under vibration. This UniCarriers washer fits UniCarriers lift truck equipment and weighs about a tenth of a pound. It serves as a direct replacement for the corresponding hardware point in the original assembly, restoring proper seating and clamp load once installed.
A washer spreads the clamp load of a bolt or nut across a wider surface, protecting the mating part and helping the joint hold tension under vibration. This UniCarriers washer measures roughly 1.2 by 2 inches with a 0.2 inch thickness and serves that role on UniCarriers equipment.
Because a washer has to fit the fastener it backs, match the bore and outside diameter to the washer being replaced, since the bore governs whether it passes over the bolt and the outside diameter sets how far the clamp load spreads.
| SKU | HW-2361 |
|---|---|
| Product ID | 14019 |
| OEM Number | HW-2361 |
| Category | Chassis, Hardware |
| Brand | UniCarriers |
| Weight | 0.1 lbs |
| Dimensions | 1.2" L × 0.2" W × 2" H |
| Type | Washer |
|---|---|
| Equipment | UniCarriers |
| Manufacturer Part Number | HW-2361 |
| Weight (lbs) | 0.10 |
| Length (in) | 1.20 |
| Width (in) | 0.20 |
| Height (in) | 2.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HW-2361 |
|---|---|
| Product ID | 14019 |
| Short Link | https://forkliftsetc.net/?p=14019 |
| OEM Number | HW-2361 |
| Part Number |
|---|
| 220020067 |
| 3031409 |
| 800058739 |
| BR48508-FS000 |
| BR48508FS000 |
| BR9879-026 |
| BR98790-026 |
| BR98790-26 |
| BR9879026 |
| HW-2361 |
| LP1070-1002 |
| MB48508-FS000 |
| NI48508-FS000 |
| NI9879-026 |
| SY87444 |
| TC48508-FS000 |
| UK48508-FS000 |
| UK9879-026 |
| YT220020067 |
