$4.36
This Tennant flat washer spreads a fastener's clamping load across a wider area on Tennant floor sweepers and scrubbers, sitting between the nut or bolt head and the joint face to protect the surface as the fastener is torqued. It is replaced once it becomes dished, cracked, or corroded and can no longer distribute load evenly.
A flat washer spreads the clamping load of a fastener over a wider area, seating between the nut or bolt head and the joint face so the load does not dig into or distort the surface as the fastener is torqued. It also gives the fastener a smooth, square bearing surface to draw down against.
A washer is replaced when it is dished, cracked, or corroded. Match the bore to the fastener diameter and the washer to the joint it protects.
| Type | Washer, Flat |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | TN32969 |
|---|---|
| Product ID | 13983 |
| Short Link | https://forkliftsetc.net/?p=13983 |
| Part Number |
|---|
| TN32969 |
