$267.82
Cataloged for Crown lift trucks, this yoke is a forked connecting component that joins two parts across a pin or shaft, letting them pivot or transmit motion while holding their alignment. A yoke that wears at its pin bores develops slop that shows up as lost motion, play, or knocking, and replacing it restores tight, correctly spaced pivot holes.
Cataloged for Crown lift trucks, this yoke is a forked connecting component that joins two parts across a pin or shaft, letting them pivot or transmit motion while holding their alignment. The forked end straddles the mating part and carries the pin that ties the joint together, a design used at pivot and coupling points where a straight link cannot flex.
A yoke that wears at its pin bores develops slop in the joint, which shows up as lost motion, play, or knocking in whatever it connects. Replacing it restores tight, correctly spaced pivot holes and removes the lash a worn yoke introduces.
Match the pin-bore diameter and the spacing across the fork against the yoke being replaced, since these dimensions set how the yoke seats on its pin and mates to the part it couples to.
| Type | Yoke |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 3.50 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | E-6302 |
|---|---|
| Product ID | 14637 |
| Short Link | https://forkliftsetc.net/?p=14637 |
| Part Number |
|---|
| 800015537 |
| CR115331 |
| E-6302 |
| ET17528 |
| LP756-1018 |
