$1,175.50
This Crown yoke shaft assembly pairs a machined shaft with a yoke for Crown lift trucks, forming a rotating link that transfers motion between connected components in the truck's steer and drive geometry. Crown supplies it as a finished shaft-and-yoke unit ready to install, delivering the shaft, yoke, and their connection together as one serviceable part.
Supplied by Crown as a finished shaft-and-yoke unit, this yoke shaft assembly pairs a machined shaft with a yoke to form a rotating link that transfers motion between connected components in the truck's steer and drive geometry. Because it arrives assembled, it installs as a single unit in place of a worn shaft and yoke rather than requiring the two to be fitted together on the bench.
The yoke end connects to a mating component while the shaft turns in its bearings or bushings, and wear at either the yoke joint or the shaft journals introduces play that shows up as slack or roughness in the linkage. Replacing the assembly restores tight motion transfer. Match the shaft diameter, shaft length, and yoke geometry to the part being replaced, since all three must line up for the unit to seat and articulate correctly.
| Type | Yoke Shaft Asm |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 90.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR138335R |
|---|---|
| Product ID | 14114 |
| Short Link | https://forkliftsetc.net/?p=14114 |
| Part Number |
|---|
| CR138335R |
