$13.65
A Raymond potentiometer positioner for Raymond lift trucks, an electrical control component that senses position and feeds that reading to the truck's control system as a variable resistance. It reports the position of a control input, such as an accelerator or steering reference. Its wiper track wears over time, showing up as jumpy, dead, or inconsistent control response, and the correct Raymond replacement restores smooth, accurate position sensing.
Position feedback on a Raymond lift truck runs through a potentiometer positioner like this one, which converts the mechanical position of a control input into a variable resistance the truck's controller can read. As the operator moves an accelerator, steering reference, or similar control, the wiper sweeps the resistive track and reports the exact position, so the controller can respond in proportion rather than in fixed steps.
The wiper track is the part that wears. After enough travel it develops dead spots and inconsistent contact, which show up as jumpy throttle response, a control that drops out mid-range, or erratic behavior the operator feels as unsteady input. A fresh positioner restores smooth, repeatable position sensing across the full sweep.
This unit replaces the original potentiometer positioner in its mounting on Raymond electric lift trucks. Confirm the resistance value and the shaft or lever interface against the unit being replaced, since positioners that look alike can differ in taper and travel.
| Type | Positioner, Potentiometer |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.50 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA202280-00 |
|---|---|
| Product ID | 11944 |
| Short Link | https://forkliftsetc.net/?p=11944 |
| Part Number |
|---|
| 800148568 |
| RA202280-00 |
