$22.72
This shaft is a rotating or pivoting member sized for a specific location on Raymond electric lift trucks, carrying torque or supporting a rotating part while holding it in precise alignment. Roughly 13.5 inches long, its diameter and length decide where it fits and what it drives. Shafts are replaced when the journals score or the part bends.
Roughly 13.5 inches long and about an inch across its major dimension, this shaft is a rotating or pivoting member sized for a specific location on Raymond electric lift trucks. A shaft carries torque or supports a rotating part while holding it in precise alignment, so its diameter and length are the specifications that decide where it fits and what it drives.
At about one and a quarter pounds it is a solid, rigid component built to take bearing loads and the wear that a turning surface sees over a long duty cycle. Shafts are replaced when the bearing journals score, the part bends, or a keyway or mating surface wears out of tolerance, all of which cost the alignment the assembly depends on.
Match the replacement to the diameter, length, and any keyed or stepped features of the shaft coming off the truck, since a shaft that is close in length but wrong at a bearing diameter will not seat or turn true. Forklifts Etc. supplies it as a direct replacement for the Raymond original.
| Type | Shaft |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 1.25 |
| Length (in) | 0.70 |
| Width (in) | 1.00 |
| Height (in) | 13.5 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA828-001-335/007 |
|---|---|
| Product ID | 12195 |
| Short Link | https://forkliftsetc.net/?p=12195 |
| Part Number |
|---|
| BR-1682 |
| RA828-001-335-007 |
| RA828-001-335/007 |
