$19.54
This mechanical spacer tube is built by Raymond for its electric lift trucks. It works as a spacer pipe, setting and holding a fixed distance between components mounted on a shaft or within a bolted assembly so parts stay correctly located under load. Sturdy steel construction keeps that spacing stable through repeated service on Raymond equipment.
Manufactured by Raymond for its electric lift trucks, this mechanical spacer tube sets and holds a fixed distance between components mounted on a shaft or within a bolted assembly, keeping those parts correctly located under load. The tube slips over a shaft or bolt and bears the clamping force passing through it, which is why it is a rigid tube rather than a compressible sleeve.
Because it establishes spacing, a spacer of the wrong length lets the parts it separates shift out of position, changing the alignment the assembly was built to hold. Match the replacement to the original by its length, inner diameter, and outer diameter, since all three govern whether it fits the shaft and sets the correct gap.
| Type | Tube-Mech |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 2.15 |
| Length (in) | 1.15 |
| Width (in) | 1.25 |
| Height (in) | 15.5 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA828-001-429/005 |
|---|---|
| Product ID | 11185 |
| Short Link | https://forkliftsetc.net/?p=11185 |
| Part Number |
|---|
| RA828-001-429/005 |
