$12.50
This Raymond grease lubricates the bearings, pivots, and moving joints on Raymond material handling equipment, forming a film that reduces friction and wear while resisting being squeezed out under load. It stays in place where oil would run off, holding its film on vertical and heavily loaded surfaces and sealing the contact point against water and contaminants. A maintenance lubricant for routine service points.
Raymond grease lubricates the bearings, pivots, and moving joints across Raymond material handling equipment, laying down a film that cuts friction and wear while resisting being squeezed out under load. Unlike an oil, grease stays where it is put, clinging to vertical and heavily loaded surfaces instead of running off, and it seals the contact point against water and the dust and grit of a working floor.
That staying power is why greased points survive the duty cycle. A joint that runs dry goes metal-on-metal, and the wear that follows shows up as play, heat, and eventual seizure. Worked into a bearing or pivot on schedule, this grease keeps those surfaces separated and turning freely.
Supplied as a maintenance lubricant for routine chassis and drivetrain service points, it is applied at the intervals the equipment calls for so the film stays fresh and contaminants stay out.
| Type | Grease |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA990-400/WG1 |
|---|---|
| Product ID | 15332 |
| Short Link | https://forkliftsetc.net/?p=15332 |
| Part Number |
|---|
| RA990-400/WG1 |
