$270.50
This water pump circulates coolant through the engine and radiator on Crown lift trucks, carrying heat away from the block and cylinder head to hold engine temperature in the safe range and guard against overheating. Built to Crown fit and performance specifications with the correct impeller, shaft, and mounting, it is a wear item worth replacing at the first sign of leakage or bearing noise.
Coolant is circulated through the engine block, cylinder head, and radiator by this water pump on Crown lift trucks, carrying combustion heat away from the engine during operation. Steady coolant flow is what keeps engine temperature in its safe range, and a pump that stops moving coolant lets the engine overheat and risk serious internal damage.
Crown builds the pump to its fit and performance specifications, with the correct impeller, shaft, and mounting to bolt in and seal to the block properly. Because it is driven whenever the engine runs, the pump is a wear item whose bearing and seal eventually give out.
Coolant weeping from the pump's weep hole or a growing bearing noise are the usual signals that it is failing, and replacing it at that first sign avoids an overheat in service. Match the pump's mounting pattern, impeller, and drive to the unit being replaced during cooling system service.
| SKU | CR141885 |
|---|---|
| Product ID | 11444 |
| Category | Cooling, Water Pump Assemblies |
| Brand | Crown |
| Weight | 5.5 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Water Pump |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 5.50 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR141885 |
|---|---|
| Product ID | 11444 |
| Short Link | https://forkliftsetc.net/?p=11444 |
| Part Number |
|---|
| 800145687 |
| CR141885 |
| TSA-800145687 |
| TSA-CR141885 |
