$60.40
Three-terminal horn built to run on any system from 24 to 48 volts, giving a lift truck its audible warning across the common electric-truck voltages as it sounds to alert people on foot and other operators. The wide range lets one horn cover 24, 36, and 48 volt trucks, and the three-terminal wiring supports the switching the installation calls for.
Built to run on any system from 24 to 48 volts, this three-terminal horn gives a lift truck its audible warning across the common electric-truck voltages, sounding to alert people on foot and other operators as the machine moves. The wide voltage range lets one horn cover 24, 36, and 48 volt trucks, and the three-terminal wiring supports the switching the installation calls for.
A horn is a safety signal, so one that has gone weak or silent leaves the truck without the warning it needs to give and gets replaced promptly. Match the 24 to 48 volt range and the three-terminal arrangement to the horn being replaced so it wires in and sounds correctly.
| SKU | SY-109 |
|---|---|
| Product ID | 14606 |
| Category | Back-Up Alarms & Horns, Electrical |
| Brand | Hyster |
| Weight | 0.9 lbs |
| Dimensions | 0.1" L × 2.4" W × 4.75" H |
| Type | 24-48 Volt 3-Term Horn |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | SY-109 |
|---|---|
| Product ID | 14606 |
| Short Link | https://forkliftsetc.net/?p=14606 |
| Part Number |
|---|
| SY-109 |
