$795.50
This 36 volt charger delivers the controlled charge cycle a traction battery needs to reach full capacity and hold it, matched to the 36 volt systems that Crown lift trucks run. Output voltage has to match the battery pack, and the 36 volt rating ties this unit to that class of truck, keeping it ready for the next shift.
This 36 volt charger restores the battery pack on an electric lift truck, matched to the 36 volt systems that Crown lift trucks run. Charger output voltage has to match the battery pack, and the 36 volt rating is what ties this unit to a specific class of truck: too little and the pack never reaches full charge; the wrong profile and battery life suffers over time.
A charger delivers the controlled charge cycle a traction battery needs to reach full capacity and hold it, which is what keeps a truck ready for the next shift instead of tapering off mid-run. When a charger fails or drifts out of spec, the symptom shows up as a pack that will not hold a full charge and run time that keeps shrinking.
This unit is cataloged for the Crown application and replaces a failed or aging charger on that equipment. Confirm your battery pack is a 36 volt system and match the connector and charge profile to what the truck's battery requires.
| SKU | DQ940-0002 |
|---|---|
| Product ID | 14436 |
| Category | Batteries, Electrical |
| Brand | Crown |
| Weight | 6.8 lbs |
| Dimensions | 10.05" L × 7.5" W × 3.2" H |
| Type | 36V Charger |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 6.80 |
| Length (in) | 10.05 |
| Width (in) | 7.50 |
| Height (in) | 3.2 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | DQ940-0002 |
|---|---|
| Product ID | 14436 |
| Short Link | https://forkliftsetc.net/?p=14436 |
| Part Number |
|---|
| DQ940-0002 |
