AGM Battery 12V 150Ah – PSV12-150

Rated at 12 volts and 150 amp-hours, this sealed VRLA battery uses absorbed glass mat construction to deliver deep-cycle capacity in a maintenance-free, non-spillable package, sized for the standby, mobility, and accessory power roles that call for a Group GC12 battery. The 150 amp-hour capacity carries a sustained draw across a long duty cycle without the voltage sag that shortens the life of an undersized cell.

AGM construction absorbs the electrolyte into glass mat separators rather than leaving it as free liquid, so the battery is sealed, non-spillable, and free of the routine watering a flooded battery needs. It is built in the GC12 case at a listed 85.8 pounds, measuring 12.88 by 6.93 by 10 inches, with dual terminals for the cable connections.

As the plates age, capacity falls and run time between charges shortens, the normal signal that a deep-cycle battery has reached the end of its service life rather than a fault. Match the GC12 group size, the case dimensions, and the dual terminal layout against the tray and cables it has to fit, since a battery right in voltage but wrong in case size or terminal style will not seat or connect.