$137.19
Switching the high-current battery power that drives an electric lift truck's motors, this Raymond contactor uses a low-power coil to open and close heavy main contacts, making and breaking the connection between the battery and a drive or pump motor on command. Once thousands of cycles pit and erode the contact faces, symptoms like chattering or intermittent operation mean it is replaced rather than repaired. Built for Raymond equipment.
A contactor switches the high-current battery power that drives an electric lift truck's motors, using a low-power coil to open and close heavy main contacts that carry far more current than a dashboard switch ever could. This Raymond contactor performs that switching in the truck's power circuit, making and breaking the connection between the battery and a drive or pump motor on command.
Contactors are wear components by nature. Every time the contacts close and open under load they arc, and over thousands of cycles that arcing pits and erodes the contact faces until they no longer make clean, low-resistance contact. The symptoms are intermittent operation, chattering, or a circuit that will not energize, and once the contacts are burned the contactor is replaced rather than repaired. This is a Raymond contactor for the power-switching circuit it was cataloged to serve on Raymond equipment.
| SKU | RA313066-000 |
|---|---|
| Product ID | 15482 |
| Category | Contactors, Electrical |
| Brand | Raymond |
| Weight | 1.1 lbs |
| Dimensions | 2.1" L × 2.1" W × 3.15" H |
| Type | Contactor |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA313066-000 |
|---|---|
| Product ID | 15482 |
| Short Link | https://forkliftsetc.net/?p=15482 |
| Part Number |
|---|
| RA313066-000 |
