$90.98
Switching high-current battery power to the drive or pump circuit on an electric lift truck, this 24 volt contactor uses an electromagnetic coil to close heavy-duty main contacts a low-current control signal could not carry directly. Supplied without the mounting bracket, so the existing bracket carries over, it restores clean, positive switching where pitted, welded, or burned contacts caused dropouts.
Rated for a 24 volt coil, this contactor switches high-current battery power to the drive or pump circuit on an electric lift truck, using an electromagnetic coil to close heavy-duty main contacts that a low-current control signal could not carry directly. Contactors take thousands of make-and-break cycles, and the contacts eventually pit, weld, or burn, which shows up as a truck that will not power up, drops out under load, or chatters on engagement. Replacing a worn contactor restores clean, positive switching to the circuit it controls.
This contactor is supplied without the mounting bracket, so the existing bracket carries over to the replacement. Match the coil voltage and the contact rating to the contactor being replaced, since a 24 volt coil will not pull in on a different system voltage and an undersized contact set will not carry the same load.
| SKU | AFS819/24A |
|---|---|
| Product ID | 15097 |
| Category | Contactors, Electrical |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Contactor WO/Bracket 24V |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | AFS819/24A |
|---|---|
| Product ID | 15097 |
| Short Link | https://forkliftsetc.net/?p=15097 |
| Part Number |
|---|
| AFS819/24A |
