$62.50
A lift cable carries the motion that raises and lowers the lifting mechanism, running over pulleys or through the mast so force applied at one end becomes vertical travel at the other. Anchored to specific points, it takes a tension cycle every time the equipment lifts and is built to hold that repeated load without stretching or fraying. It wears where it bends over sheaves and at its end fittings.
A lift cable carries the motion that raises and lowers the lifting mechanism, running over pulleys or through the mast so that force applied at one end translates into vertical travel at the other. Routed and anchored to specific points, it takes a tension cycle every time the equipment lifts, and it is built to hold that repeated load without stretching or fraying.
Cables in lift service wear at the points where they bend over sheaves and at their end fittings, where broken strands or fraying signal that the cable has reached the end of safe service and should be replaced before it fails under load.
Match the cable length, diameter, and end fitting style to the one being replaced, since a lift cable is defined by its routing length and how its ends anchor into the assembly.
| SKU | TN71101 |
|---|---|
| Product ID | 13848 |
| Category | Electrical, Harness & Wiring |
| Brand | Tennant |
| Weight | 0.2 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Cable Lift |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | TN71101 |
|---|---|
| Product ID | 13848 |
| Short Link | https://forkliftsetc.net/?p=13848 |
| Part Number |
|---|
| 800130017 |
| 800143136 |
| APIJ-5329 |
| BT71101TE |
| IJ-5329 |
| MB71101 |
| NB71101 |
| SY1210299 |
| TN71101 |
| VPTNN71101 |
