Crown 18 AWG 5 Conductor Cable – CR83603-1

Crown's 18 AWG five-conductor cable carries the low-voltage control and signal wiring through the harness runs of a Crown electric lift truck, bundling five separately insulated 18-gauge conductors inside a single outer jacket. Sold by the foot, it lets a technician pull exactly the length a repair or harness rebuild needs rather than working from a fixed pre-cut piece.

The 18 AWG conductor size suits the control-circuit currents these runs carry, and grouping five conductors in one jacket keeps a multi-wire circuit organized and protected as it routes through the truck. The jacket shields the conductors from the abrasion, oil, and flexing a cable sees inside a working truck, and a cable with a chafed jacket or nicked conductor is what gets cut out and replaced during a harness repair.

This is the Crown cable for those harness runs, supplied by the foot. Match the gauge and conductor count to the run being repaired, since an 18-gauge five-conductor cable is not interchangeable with a different gauge or conductor count.