$65.59
Crown builds this keyless switch with an integrated harness to start and secure its lift trucks without a mechanical key, mounted on the operator arm and pre-wired so the switch and its connector land as one assembly. It replaces the worn tumbler of a keyed ignition with push or code entry, removing the lost-key and worn-cylinder problems that sideline a keyed truck.
Crown builds this keyless switch with an integrated harness to start and secure its lift trucks without a mechanical key, mounted on the operator arm where the driver reaches it and pre-wired so the switch and its connector land as one assembly. A keyless switch replaces the worn tumbler of a keyed ignition with push or code entry, removing the lost-key and worn-cylinder problems that take a keyed truck out of service.
Supplying the switch with its harness means the contacts and the wiring that carries them are renewed together, so the connection into the truck's circuit is fresh at both the switch and the plug. The switch and its harness terminals are the wear points, since every start cycle actuates the contacts and vibration works the crimps over time.
Matched to Crown lift trucks and the connector the truck provides, it installs into the arm position it was cataloged for without splicing new terminals into the loom.
| SKU | CR143953 |
|---|---|
| Product ID | 11659 |
| Category | Electrical, Ignition Switches, Key Sets |
| Brand | Crown |
| Weight | 0.5 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Arm Keyless Switch W/Harness |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.50 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR143953 |
|---|---|
| Product ID | 11659 |
| Short Link | https://forkliftsetc.net/?p=11659 |
| Part Number |
|---|
| CR143953 |
