$396.00
Combining a support bearing with an integrated encoder ring, this encoder bearing gives a drive or steer motor both a rotating support and the speed and position feedback its controller needs from a single component. The built-in element reads rotation and reports it to the control system, which regulates motor speed, direction, and positioning. Wear or contamination degrades the signal, showing up as erratic speed control or motor-feedback fault codes.
An encoder bearing combines a support bearing with an integrated encoder ring, giving a drive or steer motor both a rotating support and the speed and position feedback its controller needs from a single component. The encoder element reads rotation and reports it to the truck's control system, which uses that signal to regulate motor speed, direction, and positioning.
Because the sensing element is built into a bearing that turns constantly under load, wear in the bearing or contamination on the encoder ring degrades the signal, which can show up as erratic speed control or fault codes tied to motor feedback. Replacing the unit restores both clean rotation and a reliable feedback signal.
Match the bearing bore, outside diameter, and encoder output type to the part being replaced, since both the mechanical fit and the signal format have to match the motor and controller.
| SKU | SBG-1 |
|---|---|
| Product ID | 15023 |
| Category | Electrical, Sensors |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Encoder Bearing |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | SBG-1 |
|---|---|
| Product ID | 15023 |
| Short Link | https://forkliftsetc.net/?p=15023 |
| Part Number |
|---|
| SBG-1 |
