$125.65
Sensing the position of the entry gate or side arm on the left-hand side of the operator compartment, this Raymond gate switch assembly feeds that signal into the truck's control circuit as part of the operator-presence logic that governs whether the truck will travel and lift. When the gate reads out of position the switch opens the circuit, so a failed switch can leave a running truck dead.
Built for the left-hand side of the operator compartment, this Raymond gate switch assembly senses the position of the entry gate or side arm and feeds that signal into the truck's control circuit, part of the operator-presence logic that governs whether the truck will travel and lift. When the gate is not in its expected position the switch opens the circuit, so a failed or intermittent switch can leave a truck that will not run even though nothing else is wrong.
Contacts wear and the mechanism loosens over thousands of entries and exits, and that is the point at which a switch starts reading intermittently. Replacing it restores reliable gate detection. This is the left-hand assembly specifically, so confirm the side against the unit coming off, since the left and right switches are handed and not interchangeable.
| SKU | RA120419S001 |
|---|---|
| Product ID | 14780 |
| Category | Electrical, Switches |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Gate Switch Assembly LH |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA120419S001 |
|---|---|
| Product ID | 14780 |
| Short Link | https://forkliftsetc.net/?p=14780 |
| Part Number |
|---|
| RA120419S001 |
