$150.00
Renewing the seals, o-rings, wipers, and backup rings inside a cylinder in one matched set, this Raymond hydraulic seal kit rebuilds the parts that hold pressure and keep contamination out as they harden, cut, and lose their seal with age. Cylinder seals are the usual failure point long before the barrel or rod wears, and a fresh kit restores full seal at a fraction of a new cylinder's cost.
A hydraulic seal kit renews the seals, o-rings, wipers, and backup rings inside a cylinder in one matched set, the parts that hold pressure and keep contamination out and that harden, cut, and lose their seal as a cylinder ages. This Raymond seal kit is that service set, cataloged to rebuild the specific cylinder it belongs to rather than a bag of generic o-rings.
Cylinder seals are the usual failure point long before the barrel or rod wears out: as they degrade, the cylinder drifts under load, weeps or streams oil past the rod, and loses holding force. Rebuilding with a fresh seal kit restores full seal at a fraction of the cost of replacing the cylinder. Match the kit to the exact cylinder bore and rod it serves, since a seal kit is dimensioned to one cylinder and the wrong set will not seal even if it physically fits.
| SKU | RA1150998-01 |
|---|---|
| Product ID | 14769 |
| Category | Hydraulics, Seal Kits & Parts |
| Brand | Raymond |
| Weight | 0.2 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Seal Kit |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1150998-01 |
|---|---|
| Product ID | 14769 |
| Short Link | https://forkliftsetc.net/?p=14769 |
| Part Number |
|---|
| RA1150998-01 |
