Crown Left-Hand Hydraulic Reach Cylinder Remanufactured – CR-468R

Remanufactured to original specification, this left-hand hydraulic reach cylinder drives the pantograph reach mechanism that extends and retracts the forks on Crown RD 5795 narrow-aisle reach trucks. The cylinder is the actuator that powers the scissor linkage out into the rack and back, working under repeated hydraulic load every time the operator reaches a pallet, and it is built with a reinforced barrel and internal wear rings to hold sealing and alignment through that duty.

At roughly 65 pounds, it is the left-hand unit of the reach assembly, matched to that side of the pantograph, so the hand designation has to match the position on the truck. The remanufactured build returns a used core to working condition with renewed internal components, restoring the cylinder's stroke and sealing rather than replacing it new. A reach cylinder that leaks past its seals or scores its barrel loses the smooth, controlled reach the truck depends on in tight aisles.

Confirm this is the left-hand cylinder for the Crown RD 5795 series and that the reach mechanism is the pantograph type, since a right-hand unit or a different reach design will not install in the same position. This is the reach cylinder Forklifts Etc. supplies for that narrow-aisle application.