$1,000.00
Moving the fork carriage left and right across the mast, this Raymond side shift cylinder lets an operator align the forks to a load or rack position without repositioning the whole truck. It converts hydraulic pressure into the side-to-side stroke that makes fine load placement possible. Worn seals lose holding force and the carriage drifts, so replacing it restores full side shift travel.
A side shift cylinder moves the fork carriage left and right across the mast, letting an operator align the forks to a load or a rack position without repositioning the whole truck, and this is a Raymond cylinder built for that lateral travel. It converts hydraulic pressure into the side-to-side stroke that makes fine load placement possible, a function the truck uses on nearly every pick and put-away.
Like any hydraulic cylinder, its seals wear under repeated pressure cycles: a weeping rod seal or a scored bore loses holding force, and the carriage drifts or shifts weakly instead of moving crisply to position. Replacing the cylinder restores full side shift travel and firm holding. Built by Raymond for its lift trucks, its stroke, port sizes, and mounting match the side shift assembly it was cataloged for.
| SKU | RA1152882 |
|---|---|
| Product ID | 14265 |
| Category | Hydraulics |
| Brand | Raymond |
| Weight | 15.8 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Cylinder Side Shift |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1152882 |
|---|---|
| Product ID | 14265 |
| Short Link | https://forkliftsetc.net/?p=14265 |
| Part Number |
|---|
| RA1152882 |
