$267.82
Hydraulic hose for Tennant lift trucks, carrying pressurized flow in the lift or steering circuit; length and fittings are specific to the routing. Hoses are replaced when they weep, bulge, or chafe, since a failed line drops the load and loses pressure.
Sized at a 2.00 inch inner diameter and 33.9 inches long, this black drain hose assembly carries used water out of the tank on Tennant T16 and T16 AMR rider scrubbers when the operator empties the machine. It runs from the recovery or solution tank to the drain point, and the assembly arrives with its fittings so it installs as a complete unit.
A drain hose is a wear item on a scrubber. It cracks, kinks, or its end fittings start to leak over time, and once it does the tank either leaks onto the floor or will not empty cleanly, which defeats the point of a drain line. Replacing the hose restores a clean, sealed path for emptying the tank.
Match the inner diameter and length to the hose being replaced, along with the fitting style at each end, since the hose has to seat on the same connectors and reach between the same two points on the machine.
| SKU | TN1074398 |
|---|---|
| Product ID | 14959 |
| Category | Hoses, Hydraulics |
| Brand | Tennant |
| Weight | 1.6 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Drain Hose Assembly |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | TN1074398 |
|---|---|
| Product ID | 14959 |
| Short Link | https://forkliftsetc.net/?p=14959 |
| Part Number |
|---|
| TN1074398 |
