$261.16
Built as a complete hose assembly with its end fittings already attached, this part carries fluid under pressure between two points and arrives ready to install rather than cut and crimped. The hose length and the fittings are matched as a unit to land where the routing requires. A hydraulic hose hardens, cracks, or bulges with age, so a weeping or blistered hose is the signal to replace it.
Built as a complete hose assembly with its end fittings already attached, this part carries fluid under pressure between two points in the system and arrives ready to install rather than needing to be cut and crimped. The assembly is matched as a unit so the hose length and the fittings at each end land where the routing requires.
A hydraulic hose is a wear item that hardens, cracks, or bulges with age and pressure cycling, and a hose that weeps or blisters is the signal to replace it before it fails under load. Match the length, the fitting types, and the pressure rating to the hose being replaced, since an assembly has to reach its connections and seal at both ends to hold system pressure.
| SKU | TN1031610 |
|---|---|
| Product ID | 15401 |
| Category | Hoses, Hydraulics |
| Brand | Tennant |
| Weight | 2.75 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Hose Assembly |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | TN1031610 |
|---|---|
| Product ID | 15401 |
| Short Link | https://forkliftsetc.net/?p=15401 |
| Part Number |
|---|
| TN1031610 |
