$60.27
Built to a specific length and end configuration, this Raymond custom hydraulic hose routes pressurized fluid between the pump, valves, and cylinders that lift and tilt a load. Its fitting orientation and routing path matter as much as its pressure rating, and a weeping or bulging hose signals abrasion or flex fatigue has set in. A genuine Raymond hose matches the original fitting type and routing.
Hydraulic hoses route pressurized fluid between the pump, valves, and cylinders that lift and tilt a load, and this Raymond custom hose is built to a specific length and end configuration for the circuit it serves. A custom hose is bent and routed along a defined path on the machine, so its length and fitting orientation matter as much as its pressure rating. Hoses fail from abrasion, flex fatigue, and age, and a weeping or bulging hose signals it is due for replacement before it bursts under working pressure.
As a genuine Raymond part, it matches the fitting type and routing of the original line. Match the fitting ends and overall length to the hose being removed, since a custom hose is cut to a set path and a wrong length will not route cleanly.
| SKU | RA1021890-002 |
|---|---|
| Product ID | 14843 |
| Category | Hoses, Hydraulics |
| Brand | Raymond |
| Weight | 0.1 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Hose -Custom |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1021890-002 |
|---|---|
| Product ID | 14843 |
| Short Link | https://forkliftsetc.net/?p=14843 |
| Part Number |
|---|
| RA1021890-002 |
| RA1021890/002 |
