$85.95
This custom hydraulic hose assembly routes pressurized fluid between components in the hydraulic circuit of Raymond lift trucks. Built to a specific length and end-fitting configuration, it carries flow from the pump to the valves and cylinders that power lift and auxiliary functions. As part of the circuit, it delivers the fluid that raises the mast and drives the auxiliary hydraulics.
Built to a specific length and end-fitting configuration, this custom hydraulic hose assembly routes pressurized fluid between components in the hydraulic circuit of Raymond lift trucks. It carries flow from the pump to the valves and cylinders that power the lift and auxiliary functions, holding system pressure through the bends and runs of its routing.
A hydraulic hose is a wear item that hardens, chafes, and eventually weeps or bursts at the fittings or along the run, so a fresh assembly restores a sealed, full-pressure path. Because it is made to a set length with particular ends, match the overall length and the fitting type at each end to the hose being replaced, since a hose short by an inch or wrong at the coupling will not route or seal correctly.
| SKU | RA1021890-005 |
|---|---|
| Product ID | 11785 |
| Category | Hoses, Hydraulics |
| Brand | Raymond |
| Weight | 0.75 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Hose Custom |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.75 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1021890-005 |
|---|---|
| Product ID | 11785 |
| Short Link | https://forkliftsetc.net/?p=11785 |
| Part Number |
|---|
| RA1021890-005 |
| RA1021890/005 |
