$76.19
Hydraulic hose for Raymond lift trucks, carrying pressurized flow in the lift or steering circuit; length and fittings are specific to the routing. Hoses are replaced when they weep, bulge, or chafe, since a failed line drops the load and loses pressure.
A hydraulic hose assembly for Raymond lift trucks, a length of pressure hose with its fittings crimped on and ready to install in the truck's hydraulic circuit. Because it comes as a complete assembly, the end connections and overall length are set to the Raymond application it was built for, so it installs in place of the original without cutting or re-crimping.
A hydraulic hose assembly runs under working pressure through every lift and lower cycle, and it is a wear item: the hose hardens with age and heat, and the crimped ends are where seepage usually starts. Replacing the assembly when it begins to weep keeps the circuit holding pressure and avoids the fluid loss and sluggish lift that come from a failing line.
| SKU | RA1122340 |
|---|---|
| Product ID | 11893 |
| Category | Hoses, Hydraulics |
| Brand | Raymond |
| Weight | 3 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Hose Assy, Hyd |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 3.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1122340 |
|---|---|
| Product ID | 11893 |
| Short Link | https://forkliftsetc.net/?p=11893 |
| Part Number |
|---|
| RA1122340 |
