$590.38
Serving as the pressure source for a Crown lift truck's hydraulics, this pump moves oil from the reservoir into the working circuit that powers lift, tilt, and auxiliary operations. Driven off the truck's motor, it generates the fluid flow and pressure that the control valves and cylinders rely on to raise and hold loads. Strong, steady output means predictable lift speed and firm load holding.
Serving as the pressure source for a Crown lift truck's hydraulics, this pump moves oil from the reservoir into the working circuit that powers lift, tilt, and auxiliary operations. Driven off the truck's motor, it generates the fluid flow and pressure that the control valves and cylinders rely on to raise and hold loads. Strong, steady output means predictable lift speed and firm load holding, while a pump worn on the inside brings sluggish response and reduced pressure. A fresh pump returns the system to full performance and protects downstream components from cavitation and strain. Confirm the pump matches the original ports and drive fit before installation.
| SKU | CR148548 |
|---|---|
| Product ID | 10991 |
| Category | Hydraulic Pumps, Hydraulics |
| Brand | Crown |
| Weight | 2.6 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Pump |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 2.60 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR148548 |
|---|---|
| Product ID | 10991 |
| Short Link | https://forkliftsetc.net/?p=10991 |
| Part Number |
|---|
| CR148548 |
