Cascade Sideshift Cylinder Seal Kit – CE-1046

Cascade Sideshift Cylinder Seal Kit – CE-1046

$49.40

Seal kit for rebuilding the sideshift cylinder on Cascade, Crown lift trucks, supplying the rod seal, piston seal, wiper, and o-rings to reseal one cylinder. As seals harden and wear, the cylinder weeps oil, drifts under load, or loses lift; resealing restores full pressure and is the economical alternative to a new cylinder.

Cascade Sideshift Cylinder Seal Kit – CE-1046

Restoring a worn sideshift cylinder starts with its seals, and this Cascade sideshift cylinder seal kit supplies the rod seals, piston seals, wipers, and O-rings that let the cylinder hold pressure and move the fork carriage side to side. It is matched to the bore of the sideshift cylinder it rebuilds, so the cylinder can be resealed in place rather than replaced outright.

The sideshift cylinder actuates every time an operator centers a load over a rack or dock, and that steady cycling wears the seals until they harden and let fluid past, which an operator feels as drift, sluggish shift, or a leak at the rod gland. Rebuilding with a fresh seal set brings the cylinder back to full holding force while the barrel and rod remain in service.

This is a Cascade part cataloged for the sideshift cylinder on Cascade attachments and Crown lift trucks. Match the kit to the cylinder bore and rod diameter it seals, since seal kits are dimension-specific and the wrong size will not seat correctly.

SKU CE-1046
Product ID 11541
OEM Number 563487
Category , , ,
Brand
Weight 0.15 lbs
Dimensions 0.8" L × 1" W × 2" H
Cascade Sideshift Cylinder Seal Kit – CE-1046
Specifications
Type Hydraulic cylinder seal kit
Application Sideshift cylinder
Manufacturer Part Number 563487
Weight (lbs) 0.15
Length (in) 0.80
Width (in) 1.00
Height (in) 2.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number CE-1046
Product ID 11541
Short Link https://forkliftsetc.net/?p=11541
OEM Number 563487
Cross-Reference Part Numbers
Part Number
005917380281
3138512
800015755
AC563487
ACCC563487
BT563487
CA-563487
CA-C563487
CA563487
CAC563487
CACA563487
CACC-563487
CACC563487
CAS563487
CE-1046
CL4331345
CL563487
CLC563487
CQ563487
CR116872
CR563487
CS563487
CT563487
CTNL750000441
DW563487
FT563487
HM563487
HN563487
HY3138512
HY563487
KO563487
KOCC-563487
KOCC563487
LP826-1046
MB563487
MBNL750000441
MBW-563487
MNE563487
NICAS563487
NICC-563487
RA563487
SG563487
SL563487
SY1235114
TCW-563487
TCW563487
TY00591-73802-81
TY563487

Related Items: